DUAL OSCILLATOR 46 B

The Dual Oscillator 46B module is two wide range temperature compensated VCOs in a single space. The 46B uses the same stable VCO core from the Oscillator 01B. Designed to offer the fattened sound of two oscillators with the added convenience of global tuning and switch selectable octave range controls. The UI is optimized for standard keyboard controller use. Referenced tuning controls simplify setup when performing with other concert pitch instruments.

Features:

• 2 VCOs with switch select saw and sqr/pulse wave forms
• 1V/Octave tracking inputs are normalled together.
  Insertion of a plug into B 1V/Oct input allows separate tracking of the B oscillator
• Mix out with cross fade level control
• Auxiliary VCO ' B ' output for independent processing
• Initial Pulse Width control and A and B CV PWM attenuators
• Individual CV modulation inputs with attenuators for A/B
• Detune control offsets pitch for added animation.
• Global Fine tune control
• Calibrated 7 position Rotary Octave range switch
• Calibrated 3 position octave offset* switch for 'B' Oscillator

*larger offset intervals are possible using the CV inputs.

Demo in low res 64kbps MP3 format at 22Khz
Switched on Modcan
This demo was recorded in 2 passes for the left and right hand. Also features the 904A 44A Moog LPF clone

 

Specifications:
Inputs: 100K ohms
Outputs: 1K ohms
Signal Output: Saw and Pulse: 0-5V
Switch Range 16.3Hz-523.3Hz in Octaves
18-20 Octaves available using 1V/Oct and CV inputs combined
B Octave Offset Toggle switch: 2 Octave Range
Detune Range +/- 1 Octave
Control sens: 1V/Oct