X/Y CONTROLLER 32B

The X/Y CONTROLLER 32B is a joystick controller with separate X and Y axis outputs for modulation
and a manual push button gate included.
Two modes of operation exist:

Mode 1- with the mode switch set to INT the internal 5V reference voltage is routed to the X and Y outputs to be used for voltage control of modules with cv inputs. Attenuators and Offset
panel controls permit further adjustment of voltage ranges.

Mode 2- with the mode switch set to EXT the X and Y inputs can be routed to their respective outputs by the joystick. This allows
cv or audio signals to be attenuated by the joystick. With this you can for example, route an LFO to the X output to modulate a filter cutoff while controlling the pitch of an oscillator with the Y output.
Panel attenuators control the depth of modulation range.

See Manual PDF

Features:

X and Y joystick (non sprung) with zero
output at lower left position
Panel attenuators
+/- 5V offset controls
Internal stable 5V reference
External signal inputs
5V Manual Gate

Specifications:

Input impedance: 100K ohms
Output impedance: 330 ohms
Signal Output: 10 V pk-pk
Signal Input: 10 V pk-pk
Gate out +5V

Current Requirements:
+15mA at +15V
-13mA at -15V