A Series Mounting Chassis

Accommodates up to
7 single space modules

20 Gauge Nickel plated steel construction with black anodized aluminum mounting brackets.

Built in Power Supply with locking power connectors

Dimensions:
Length 19"
Height 10.5" (frame)
Depth 9" (allow room for power cord)

3/4 chassi view

Shown with black anodized 19" rack mounting brackets

A Series Chassis design can be used in a standard 19" rack (shown above) or bolted together for free standing cabinets of unlimited size.

Wood can be screwed to the ends (from inside) to finish.

Advantages of an enclosed steel cabinet:Excellent RFI shielding and solid chassis grounding for the module panels.

Chassis can be stacked or placed end to end to build a system as large as required. Wood sides can be easily attached to complete cabinet cosmetics. (inquire about woods available)
 

Rear view showing power supply and power distribution.
The drawing to the right shows the chassis box and optional rack mounting bracket installation.

Modcan supplied custom power supplies provide 1.5amps of noise and hum free linear power with a better than +/-0.05% regulation for a 10% change in line voltage.
Load regulation is +/-0.05% for a 50% change in load.

Built in short circuit /over current protection.

PSU uses instrument grade toroidal transformer which can be configured for 110V or 230V operation.

Module power connectors on PSU board for minimum voltage drop and ease of wiring.